When a toilet overflows, stop the water first by turning the shutoff valve behind the toilet clockwise. If the valve is stuck, lift the tank lid and push the flapper down to stop more water from entering the bowl. Then do not flush again until the clog is cleared.
Stopping the Flow
The shutoff valve is usually a small oval handle on the wall or floor behind the toilet. Turn it until it stops. Turning it too hard can break an old valve, so use steady pressure instead of force. If it will not budge, you can lift the float inside the tank to stop it from refilling while you deal with the bowl.
Cleaning Up Safely
Overflow water may contain waste, so wear gloves. Soak up water with old towels and mop the floor. Wash the area with soap and water, then use a disinfectant. If water has spread under flooring or into a ceiling below, it may need more drying.
Clearing a Simple Clog
A flange plunger, the kind with an extra rubber flap, works best for toilets. Push down gently at first, then plunge firmly several times. Avoid chemical drain cleaners, which can damage the toilet and are dangerous if the water splashes.
When It Is More Than a Clog
Call a plumber if:
- The toilet overflows again after plunging
- Other drains gurgle or back up when you flush
- Water leaks around the base after the overflow
- Something solid, like a toy, has been flushed
These usually mean the problem is deeper in the drain or the toilet itself.
If the toilet keeps causing trouble, a plumber can clear it and check for damage. If several toilets or sinks in the house give you trouble, a whole-home plumbing check can spot the pattern. Keep the plunger handy until then. Call JPR Plumbing at (833) 603-1840.