A sump pump that is not draining water either is not running at all or is running without moving water out. No power, a stuck float, or a failed motor stop it from running. A clogged intake, a jammed impeller, a bad check valve, or a blocked discharge line stop it from moving water even when it runs.
If the Pump Is Silent
First, check from a dry spot whether the pump has power. A tripped breaker or GFCI outlet, or a loose plug, can cut it off. Reset a breaker once, and leave it off if it trips again. Next, look at the float. If it is stuck against the pit wall or tangled in the cord, it cannot tell the pump to start. A pump that has power and a free float but still will not run may have a failed switch or motor.
If the Pump Runs but Water Stays
A pump that hums or runs while the water level stays the same usually has something blocking the flow:
- Mud or gravel clogging the intake screen
- Debris jammed in the impeller
- A check valve that lets water fall back into the pit
- A discharge pipe that is clogged, crushed, or frozen
Check that the outdoor end of the discharge pipe is not buried under snow, leaves, or soil, and that it drains well away from the house.
Keep the Basement Safe
Many East Elmhurst homes have basements that hold storage, laundry, and sometimes living space. While the pump is not working, move belongings off the floor and keep clear of wet outlets and cords.
A pump that runs nonstop without moving water can overheat. If water keeps rising, stay away from the pit and get help.
To get water moving again, a plumber can test the pump and fix what is blocking it. Call JPR Plumbing at (833) 603-1840. To stay ahead of storms, a seasonal check of the pump and discharge line is worth it.