A water heater usually leaks because a pipe fitting has loosened, a valve is worn or opening under pressure, or the tank itself has rusted through. Fittings and valves can often be repaired, but a leaking tank usually means replacement.
Look Before You Touch
Check where the water seems to start, but keep your hands off hot pipes and parts. Water near the top often comes from the connections. Water running down the side may come from the temperature and pressure relief valve. A puddle that forms right under the tank with no clear source may mean the tank is leaking.
Common Causes
- Fittings at the top that have worked loose over time
- A relief valve releasing water because of high heat or pressure
- A drain valve near the bottom that drips
- Rust from age and sediment inside the tank
Heaters in Small Spaces
In many condos and apartments, water heaters sit in closets or small utility spaces. A leak there can reach flooring, walls, and the unit below quickly. Some heaters sit in a drain pan, but pans can overflow too.
What to Do Right Now
Close the cold-water valve on the pipe going into the heater. Turn the gas control to off or pilot on a gas model, or switch off the breaker on an electric model. If you smell gas, leave the home and call 911 or your gas utility from outside. Never plug or cap a dripping relief valve.
In some buildings, hot water comes from a central boiler, not a heater in your unit. If that is your setup, report the leak to your building staff.
Once the water is off, someone can find the leak and explain your options. For help, call JPR Plumbing at (833) 603-1840. If your tank is getting old, getting ahead of a worn-out tank can spare you a flood later.