A water bill can rise without an obvious leak because of a toilet that leaks silently, a pipe leaking where you cannot see it, a dripping outdoor faucet, or a change in how the bill was figured. Checking these one at a time usually narrows it down.

Look at the Bill Itself

Before you hunt for leaks, read the bill closely. Check whether it was based on an actual meter reading or an estimate. NYC water and sewer rates are set by the Water Board and usually change once a year. Many customers can also see daily use in their NYC Department of Environmental Protection online account, which makes spikes easier to spot.

Think About Changes at Home

More people living in the home, long visits from family, new appliances, or summer garden watering can all raise use. Compare the bill to the same months last year.

Test the Toilets

A worn flapper can let water trickle into the bowl all day and night with little sound. Add a few drops of food coloring to each tank and wait about 15 minutes without flushing. Color in the bowl means a leak. In a two-family home, test the toilets in both units.

Check for Hidden Leaks

With all water off, watch the meter. If it moves, water is going somewhere. Look for:

If use stays high and you cannot find the cause, a plumber can track down leaks you cannot see. If a repaired leak did raise your bill, DEP has a Leak Forgiveness Program you can ask about.

For help, call JPR Plumbing at (833) 603-1840. Running toilets and dripping faucets are common causes of high bills, and repairing them during one appointment can bring your usage back to normal.

Leave a Reply

Your email address will not be published. Required fields are marked *