A toilet overflows for one of two reasons. Either the bowl cannot drain because something is blocking it, or the tank keeps filling because a part inside has failed. Figuring out which one you have tells you what to do next.

The Bowl Will Not Drain

If water rises after a flush and spills over the rim, the drain is blocked. Too much toilet paper, wipes, or an object like a toy are common causes. If the toilet overflows when other fixtures drain, or water appears in the tub when you flush, the blockage may be farther down in a shared line.

The Tank Will Not Stop

Sometimes the bowl is fine but the tank keeps running. A stuck fill valve or a float set too high can send water into the overflow tube nonstop. A cracked tank can also leak onto the floor. You will often hear the water running constantly.

How to Stop It Fast

Close the valve behind the toilet by turning it clockwise. If it is stuck, lift the tank lid and press the flapper closed, or lift the float to stop the refill. Do not flush again until the problem is solved.

Clean Up and Protect the Unit Below

Overflow water may contain waste, so wear gloves. Soak it up, then wash and disinfect the floor. In co-op and apartment buildings, water on the floor can seep down. Let your downstairs neighbor and the super know if a lot of water spilled.

A toilet that overflows again and again may have a clog that was never fully cleared, a blocked vent, or a problem in the building’s drain line.

If a plunger does not solve it, or the overflow keeps coming back, the toilet and drain can be checked for a deeper clog. Call JPR Plumbing at (833) 603-1840. If other drains in the house are slow too, clearing the other slow drains too can save a second trip.

Leave a Reply

Your email address will not be published. Required fields are marked *