Water leaking around a plumbing fixture usually comes from a worn seal, a loose connection, a cracked part, or caulk and grout that have failed. Where the water shows up is the best clue to the cause.
Around a Sink or Faucet
Water at the base of the faucet often means a worn O-ring or cartridge inside. Water inside the cabinet may come from a loose supply line, a worn shutoff valve, or the drain connection under the sink. Dry everything with a towel, run the water, and watch for the first new drop.
Around a Toilet
Water at the base often means the wax seal under the toilet has failed, especially if it appears after flushing. Drips under the tank point to worn tank bolts or washers. The supply line or valve behind the toilet can also leak. In humid weather, a cold tank may sweat, which is condensation rather than a true leak.
Around a Tub or Shower
Gaps in caulk or cracked grout can let water get behind tile or under the tub. A leaking spout or shower valve can send water into the wall. If a stain appears below the bathroom only when the shower is used, the drain or valve is a likely source.
Around Appliances
Washing machines, dishwashers, and refrigerator ice makers all use hoses. Rubber hoses can crack or bulge with age. Check them a few times a year.
Once you find the likely source, close that fixture’s valve and dry the area. If the water comes back, or you cannot tell where it starts, a plumber can track it down and make the repair. Leaks around fixtures rarely fix themselves.
For help, call JPR Plumbing at (833) 603-1840. Replacing worn seals and supply lines on other fixtures during the same visit can head off the next leak.