A sump pump usually runs constantly because the float switch is stuck, the check valve has failed and water keeps flowing back into the pit, the pump is too small for the amount of water, or heavy rain has raised groundwater around the home. Some causes are harmless for a short time, while others can wear out the pump quickly.
A Stuck Float Switch
The float rises with the water and tells the pump when to turn on. If it gets caught on the side of the pit, a cord, or debris, it can stay in the “on” position. The pump then runs even when the pit is empty.
A Failed Check Valve
This valve on the discharge pipe stops pumped water from falling back into the pit. When it fails, the same water drains back in after every cycle. You may hear the pump turn on again only seconds after shutting off.
Too Much Water for the Pump
After heavy storms, groundwater can rise and keep the pit filling. Constant pumping during a big storm can be normal. If the pump still runs days later, it may be too small, or water may be entering from another source.
The discharge line can also be the problem. If the pipe carrying water outside is frozen, crushed, or blocked, water cannot leave. The pump keeps working without making progress.
What You Can Check
Unplug the pump before reaching into the pit. Then check whether the float moves freely and whether debris is in the way. Plug it back in only with dry hands and away from standing water. If your pump uses a hardwired connection, leave electrical checks to a professional.
A pump that never rests is likely to burn out when you need it most. Have a plumber inspect the pump and its parts before the next storm. Call JPR Plumbing at (833) 603-1840. If water keeps flowing into the pit, a look at the drainage around your basement may explain why.