A running or leaking toilet becomes an emergency when water is getting onto the floor, a ceiling below is wet or stained, the supply line is spraying, or the tank or bowl is cracked. A toilet that simply runs into the bowl wastes water but rarely causes damage, so it can usually wait for a scheduled repair.

Running Toilets

A toilet that keeps running or refills on its own often has a worn flapper or a fill valve set too high. The water stays inside the toilet and goes down the drain. It can raise your water bill, but it does not usually damage the home. Jiggling the handle or adjusting the float may stop it for now.

Leaks Onto the Floor

Water on the floor is a different story. It may come from the wax seal under the toilet, the bolts that hold the tank to the bowl, or the supply line. Each flush can push more water under the flooring, where it can rot the subfloor. Close the shutoff valve and avoid using the toilet until it is repaired.

Signs It Has Spread

Check the ceiling below the bathroom for stains or drips. In an apartment building, a neighbor may notice first. Soft floors around the toilet or loose tiles can mean water has been seeping for a while.

Cracks and Spraying Lines

A cracked tank or bowl can fail without warning. A supply line that sprays can release a lot of water quickly. In both cases, shut off the valve behind the toilet, or the main if needed, and call for help.

If water is leaving the toilet, a plumber can stop the leak and replace what failed. Running toilets are a common, simple job during an everyday house call, and fixing one can lower your water bill. Call JPR Plumbing at (833) 603-1840.

Leave a Reply

Your email address will not be published. Required fields are marked *