A running or leaking toilet is an emergency when water is escaping onto the floor, when it is staining or dripping through a ceiling below, when the supply line is spraying, or when water is coming from a crack in the tank or bowl. A toilet that just keeps running into its own bowl is wasting water, but it is not damaging your home.
The Difference Between Running and Leaking
Running means water is flowing from the tank into the bowl and down the drain when it should not be. It shows up on your water bill, not your floor. Leaking means water is getting out of the toilet entirely. That is what causes damage.
Fixing a Running Toilet Soon
Most running toilets simply have a worn flapper, a chain caught under the flapper, or a float set too high. Jiggling the handle may stop it for now. Replacing the flapper is a common, inexpensive repair.
Leaks That Need Fast Action
- Water at the base after each flush, usually a failed wax ring
- Drips from the bolts that hold the tank to the bowl
- A supply hose that is wet, bulging, or spraying
- Water seeping from a hairline crack
For any of these, close the shutoff valve behind the toilet. If it will not turn or water keeps coming, close the main.
Signs the Leak Has Already Spread
Check the ceiling under the bathroom for stains. Press the floor around the toilet for softness. In multi-level homes and apartments, a neighbor below may notice before you do.
When water is escaping, a plumber can replace the failed seal, hose, or toilet. A toilet that only runs can be handled during a planned bathroom repair visit. In the meantime, close the valve behind the toilet between flushes if the running gets bad. Keep towels nearby. Call JPR Plumbing at (833) 603-1840.