When a toilet overflows, stop the water first. Turn the valve behind the toilet clockwise, or lift the tank lid and press the flapper closed. Then clean up and deal with the clog only if it is safe to do so.

Stop the Flow

The shutoff valve is usually on the wall or floor behind the toilet. If it is stiff, do not force it, because old valves can snap. Lifting the float arm in the tank also stops it from refilling. Do not flush again until the clog is cleared.

Think About the Unit Below

In apartment and condo buildings, overflow water can soak through the floor quickly. If a lot of water spilled, let your downstairs neighbor and your building staff know. A quick warning can save their ceiling and belongings.

Clean Up Safely

Overflow water may contain waste. Wear gloves, soak up the water with old towels, and bag them. Wash the floor with soap and water, then disinfect. Keep kids and pets out until it is clean.

Try a Plunger, Then Stop

A flange plunger, made for toilets, clears many simple clogs. Make a good seal and push and pull firmly. If water rises close to the rim, stop. Skip chemical drain cleaners in toilets. They can splash and may damage parts.

Call a plumber if:

Those last two can point to a clog in a shared line, which is a bigger job than a plunger can handle.

When the clog will not budge, a plumber can clear the bowl and check its seal. JPR Plumbing can help at (833) 603-1840. If toilets keep clogging, a look at the drain line they share may explain why.

Leave a Reply

Your email address will not be published. Required fields are marked *