When a sump pump stops working, keep yourself safe from electrical hazards, then check the breaker, the outlet, and the float. While you arrange a repair, slow the water heading toward the pit and move belongings up off the basement floor.
Safety Comes First
If water has spread across the floor or is touching the pump’s cord, outlet, or the electrical panel, stay out of the basement. Do not unplug anything while standing in water. If the breaker panel is in a dry spot, you can switch off power to the basement from there.
Find Out What Stopped It
When it is safe:
- Check for a tripped breaker or a ground fault outlet that clicked off
- Make sure the plug is firmly seated
- Unplug the pump and lift the float to see if it moves freely
- Clear debris from around the base and intake
After any fix, plug the pump back in with dry hands and pour a bucket of water into the pit. It should start, empty the pit, and shut off.
Slow the Water Down
Skip laundry and long showers if they drain toward the pit. Outside, make sure gutters are clear and downspouts point away from the foundation.
Protect the Basement
Lift stored items, electronics, and furniture onto shelves or move them upstairs. Use towels and a mop for small amounts of water, and keep children and pets out of the basement. Take photos for insurance.
Looking ahead, pumps often fail during long storms or power outages. A battery backup pump or a high-water alarm can add a layer of protection.
If the pump will not restart, a plumber can repair it or install a new one. Pumps also work best when the discharge line outside is routed well away from the house, so the water does not drain right back. Call JPR Plumbing at (833) 603-1840.