If your toilet will not stop overflowing, turn the shutoff valve behind it clockwise right away. If the valve is stuck or does not stop the water, lift the tank lid and raise the float to stop the fill valve. If water still keeps coming, close the main water valve for the home. Do not flush again until the problem is fixed.

Why It Keeps Overflowing

A toilet overflows when the bowl cannot drain and water keeps entering. Usually the drain is clogged. But if the bowl keeps filling even without flushing, the fill valve inside the tank may be stuck open. In that case, water runs into the tank, through the overflow tube, and into the bowl nonstop.

Stopping the Water

Once the flow stops, you have time to deal with the water on the floor.

Cleaning Up

Wear gloves, since overflow water may contain waste. Soak up the water with towels, then wash the floor with soap and water and disinfect. Check the ceiling below and nearby baseboards for signs of water.

When to Call

Call a plumber if the fill valve will not shut off, if the toilet overflows again after plunging, if other drains gurgle when you flush, or if water leaks at the base. These problems usually need new parts or a deeper drain cleaning.

Once the water is off, a plumber can replace a stuck fill valve or clear the drain so the toilet works normally. If the toilet is old or keeps failing, talking about a newer toilet may be the better choice. Call JPR Plumbing at (833) 603-1840.

Leave a Reply

Your email address will not be published. Required fields are marked *