If your toilet will not stop overflowing, cut off its water supply. Turn the valve behind the toilet clockwise. If that does not work, hold the flapper closed inside the tank and close the main shutoff. Then get help, because a toilet that keeps filling usually has a stuck part or a blocked drain.
Stop the Water in Steps
1. Turn the valve behind the toilet clockwise until it stops.
2. If it will not turn, lift the tank lid and press the flapper down, or lift the float arm to stop the refill.
3. If water keeps coming, close the main shutoff, usually near the water meter in the basement.
Do not flush again while the bowl is full.
Figure Out Which Problem You Have
If the bowl is full and not draining, the drain is blocked. If the bowl drains but the tank keeps running and spilling, the fill valve is stuck or set too high. Water rising in the tub when you flush points to a clog in the main line rather than the toilet.
Clean Up Safely
Overflow water can contain waste. Wear gloves, soak it up with towels, and bag them. Wash the floor with soap and water, then disinfect. If water reached a finished basement below, check the ceiling and move belongings out of the way.
When to Call
Call a plumber if the toilet will not drain after a few tries with a flange plunger, if a toy or other object went down, if the valve behind the toilet is broken, or if other drains are acting up. Skip chemical cleaners in toilets.
A toilet that will not stop running water is not something to leave overnight. Once the valve is closed, the stuck part or clog can be fixed so the toilet works normally. Call JPR Plumbing at (833) 603-1840. If other toilets act up too, checking all of them in one trip makes sense.