Sewage backs up into homes when the sewer line is blocked, damaged, or overwhelmed. Common causes include grease and wipes, tree roots, broken or sagging pipes, and city sewers that fill up during heavy rain.

Blockages in Your Sewer Line

The sewer line carries all wastewater from your home to the city sewer. Grease, food scraps, wipes, and paper towels can build up inside it. Once the line is blocked, wastewater has nowhere to go and comes back up through the lowest drains in the home.

Tree Roots and Damaged Pipes

Roots are drawn to the moisture inside sewer pipes. They can enter through small cracks or loose joints and keep growing. Older pipes can also crack, collapse, or sag over time, creating low spots where waste collects. In New York City, the sewer line from the home to the city sewer is generally the property owner’s responsibility.

Heavy Rain and Sewer Overload

During intense storms, city sewers can fill faster than they drain. When that happens, water can be pushed back toward homes, especially those in low-lying areas or with basement drains below street level. Parts of Staten Island have a history of flooding during major storms.

No Protection on the Line

A backwater valve helps keep sewage from flowing back into a home when the city sewer is full. Many older homes do not have one. NYC Department of Environmental Protection encourages property owners to consider them. They should be installed by a licensed plumber.

Watch for early signs like slow drains in several places, gurgling, and sewer smells near floor drains. These often show up before a full backup.

If you notice these signs, a plumber can inspect the line and clear it before sewage enters your home.

If you are worried about a sewer backup, call JPR Plumbing at (833) 603-1840. Keeping grease and wipes out of the drains, plus an occasional check of the main line and fixtures, lowers the risk.

Leave a Reply

Your email address will not be published. Required fields are marked *