Several drains back up at once when the pipe they share is blocked. The usual causes are a clog in the main line from grease, wipes, or paper products, tree roots growing into the sewer pipe, a sagging or broken section of pipe, or heavy rain that overloads the city sewer system.

How the System Works

Each sink, tub, and toilet drains into larger pipes that eventually join the main line. When that main line is blocked, water from every fixture has nowhere to go. It backs up through the lowest drains first, often a basement floor drain or a ground floor shower.

Grease, Wipes, and Paper

Grease poured down the kitchen sink hardens in the pipes. Wipes do not break down like toilet paper, even when the package says they are flushable. Paper towels and hygiene products also catch on pipe walls. Together, they can close off the main line.

Roots and Pipe Damage

Older sewer pipes can crack or separate at the joints. Roots grow toward the moisture and slip inside. Over time, they form a mat that traps waste. Pipes can also sag or collapse, leaving low spots where debris builds up.

Heavy Rain

During strong storms, city sewers can fill up. When that happens, water may push back into connected homes. Backups that only happen during heavy rain can point to this.

In the meantime, stop using water in the home until the line is cleared. Do not keep plunging, since that can push water out of other drains. If you live in a multi-unit building, tell the super.

Opening a main line usually takes professional equipment, so this is not a job for a store-bought snake. With the right tools, a plumber can open the main line and see what caused the clog. Simple habits, combined with periodic drain cleaning, can lower the risk of a repeat. Call JPR Plumbing at (833) 603-1840.

Leave a Reply

Your email address will not be published. Required fields are marked *