The first steps after a pipe bursts are to shut off the main water valve, keep away from electrical hazards, and call a plumber. After that, you can start removing water and protecting your home while you wait for the repair.
In the First Few Minutes
Close the main water valve. Turn it clockwise until it stops. If you cannot find it or it will not turn, call your super or building manager if you live in an apartment. Do not wait to see if the leak slows down on its own.
If water is near outlets, cords, or the electrical panel, stay away from that area. Turn off power at the breaker only if you can reach it without standing in water.
In the First Hour
Open a cold faucet on the lowest floor to drain water left in the pipes. Then start removing standing water with towels, mops, and buckets. Move furniture, rugs, and boxes to a dry spot. Take photos of the damage before you clean up too much.
Call a plumber to repair the pipe. We explain what fixing a burst pipe usually involves, from shutting off the water to testing the new section.
In the Next Day or Two
Keep drying the area with fans and open windows. Check nearby walls, ceilings, and floors for stains or soft spots, since water may have spread farther than you can see. If drywall or insulation stayed wet, it may need to come out to prevent mold.
Contact your insurance company if the damage is large. Keep your photos and any receipts.
What to Avoid
Do not turn the water back on until the pipe has been properly repaired. A quick patch with tape or a clamp may not hold up under full pressure.
If a pipe has burst in your Brooklyn home, JPR Plumbing can help. After a break, having other exposed pipes checked is a smart step, especially in colder months. Call (833) 603-1840.