You can tell a water pipe has burst if the water pressure suddenly drops, puddles appear with no clear source, walls or ceilings start to stain or bulge, your tap water turns rusty, or the water meter keeps moving when nothing is on. Some bursts are obvious, but many hide inside walls and floors.
Look at Your Taps
When water escapes through a break, less of it reaches your faucets. A shower that suddenly weakens, or a faucet that sputters with air, can be the first clue. If several fixtures change at once, the break is probably on a shared line.
Look at the Walls and Floors
Water inside a wall darkens paint, softens drywall, and can make a ceiling bulge. Floors near the break may warp or feel spongy. Water often runs along pipes before it drips, so the wet spot may be some distance from the actual break.
Listen and Smell
A steady hiss or rush inside a wall when nothing is running is a strong sign. You may hear it best at night. A musty odor that appears suddenly can come from soaked insulation or wood.
Check the Meter
With every fixture and appliance off, watch your water meter for about 15 minutes. If it keeps moving, water is leaving the system somewhere. In a large building, share what you see with the super instead.
After a hard freeze, pay extra attention to pipes along outside walls and in unheated spaces, since a split often leaks only after the ice thaws.
If you suspect a burst, close the main valve and stay away from wet electrical areas. Then, once it is safe, get the split pipe properly repaired. If you have older pipes elsewhere, asking how the rest of your piping is holding up can help you plan. Call JPR Plumbing at (833) 603-1840.