When a sump pump stops working, first check whether it has power, then see if the float is stuck, and cut back on water use while the pit is rising. If the basement is already flooding, protect yourself first and get help quickly.

Check the Power Safely

Many sump pumps stop because they lost power. Look at the breaker panel and any outlet with a test button near the pump. Only touch the panel or outlet if you are standing on dry ground with dry hands. If water is touching cords or outlets, stay out of the area and do not try to reset anything.

Check the Float and Water Use

With the pump unplugged, check whether the float is caught on the pit wall or blocked by debris. Gently freeing it may let the pump work again. Do not put your hands near the pump while it is plugged in.

Skip laundry, long showers, and dishwasher loads if any of those drain toward the pit. Point downspouts away from the house if you can do so safely outside.

Protect Your Belongings

Move boxes, electronics, and stored items off the basement floor. Raise furniture on blocks if you have them. Take photos of any water damage for insurance.

Know When to Call

Call a plumber if the pump hums but does not pump, if it runs but water does not go down, or if it makes grinding noises. Also call if the motor feels hot or you smell burning. Some pumps simply reach the end of their life and need replacing.

In Elmhurst, heavy summer storms can raise water levels fast. A backup pump or battery system can add protection for the future.

When your pump has stopped and water is rising, get the pump checked or replaced before the basement floods. Call JPR Plumbing at (833) 603-1840. Once it is running, a yearly test before the rainy months helps you avoid surprises.

Leave a Reply

Your email address will not be published. Required fields are marked *