Several drains back up at once when a pipe they share is blocked. In a house, that is usually the main line to the sewer. In an apartment building, it may be a vertical stack that serves several units, or the building sewer below them.
How Shared Lines Work
Every fixture in a home has a short drain that joins a larger pipe. When the larger pipe narrows or closes, everything above it backs up. The lowest fixtures usually show it first, which is why a ground-floor tub or a basement floor drain often fills while upstairs sinks still drain slowly.
What Blocks Shared Lines
- Grease that hardens inside kitchen lines
- Wipes and paper towels that do not break down
- Soap and hair building up over years
- Roots entering older sewer pipes through cracks
- Pipes that sag or shift and collect waste
Buildings With Many Units
Elmhurst has many apartment buildings and multifamily houses. When one stack clogs, residents on lower floors may see water coming up while people upstairs keep using their sinks and showers. If your neighbors are having the same problem, tell the super so everyone can hold off on water use and the right line can be cleared.
What You Can Do Now
Stop using water as much as possible, including the dishwasher and washing machine. Avoid chemical drain openers, which rarely reach a shared clog and can splash back. Keep people away from any dirty water.
Heavy storms can also make things worse by filling city sewers, so backups that appear only during big rains may have a different cause.
A plumber can find which section is blocked and clear it, sometimes using a camera to see inside the pipe. Call JPR Plumbing at (833) 603-1840. Until then, use as little water as you can. Afterward, regular care for the main drain can help prevent another backup.