You can recognize a burst pipe by water appearing where it should not, a sudden drop in pressure at several faucets, the sound of running water when nothing is on, and stains that spread quickly. Checking the right places first helps you find it before the damage grows.

Start in the Basement

In many East Elmhurst houses, the main supply pipes run along the basement ceiling and walls. Look for drips, spraying water, wet insulation, or a puddle under a pipe. Check near the water meter, the water heater, and any pipes along outside walls, which are more likely to freeze.

Then Check Under Sinks and Behind Appliances

Open the cabinets under kitchen and bathroom sinks. Look behind the washing machine and under the dishwasher if you can. A split supply line or hose can leak heavily in a small space.

Use Your Ears

At a quiet time, stand near walls and floors where pipes run. A hiss, spray, or rush of water with every fixture off is a strong sign of a break inside a wall or floor.

Watch the Faucets

A burst pipe lets water escape before it reaches you, so pressure may drop at several fixtures at once. Water can also sputter or come out cloudy or rusty as air and debris enter the line.

Pipes that froze during a cold snap may not leak until they thaw. If a faucet gave little or no water during freezing weather, check that area again as temperatures rise.

To confirm a leak, turn off all water and look at the meter. If it keeps moving, water is going somewhere.

Once you find a break, close the main and keep clear of wet wiring. A plumber can then repair the split section and test the line. Call JPR Plumbing at (833) 603-1840. Afterward, having the remaining exposed pipes looked at can catch weak spots early.

Leave a Reply

Your email address will not be published. Required fields are marked *