If your sump pump quits in the middle of a storm, the goal is to keep people safe first and then limit how much water reaches your belongings. Figure out quickly whether the pump lost power or has a mechanical problem, and get a plumber involved if it will not restart.

The First Few Minutes

Look before you step. If the basement floor is already wet, do not walk near the pit, extension cords, or the breaker box. Decide from the stairs whether it is safe to go down at all. If outside water is rushing in through windows or doors, leave the basement and follow official storm guidance.

Power or Pump?

Many storm failures are really power failures. If the lights are out in the house, the pump is out too. If the lights are on, the pump may have tripped its breaker or GFCI outlet, or come unplugged. Those can be checked from a dry spot. A pump that has power but only hums, or gives off a burning smell, has a mechanical problem and should stay off.

While You Wait

Work from the top of the list down. Grab things you cannot replace first, like documents and photos, then electronics, then boxes. Shelves and upstairs rooms are your friends. Keep kids and pets upstairs and out of the way.

After the Rain Stops

Once the water is gone, have the pump, the float, and the discharge line looked at before the next storm. Any water heater, furnace, or washer that sat in water should be checked too. This is also a good time to ask whether a second pump that runs on battery or water pressure makes sense for your basement.

Once the storm passes, the failed pump can be fixed or replaced and tested with water before you rely on it again. JPR Plumbing can help at (833) 603-1840. Before the next heavy rain, a check of the whole basement drainage setup is worth considering.

Leave a Reply

Your email address will not be published. Required fields are marked *