Stop using a clogged drain as soon as water stops going down, starts rising in another fixture, or comes back up dirty or smelly. Running more water into a blocked drain can cause an overflow and may push the clog further into the pipe.
When the Sink or Tub Holds Water
If a sink or tub fills and stays full, the drain is blocked. Adding more water will not help. Leave that fixture alone and avoid pouring boiling water into it, which can damage some pipes and porcelain.
When Water Appears Somewhere Else
Water in the tub when you run the bathroom sink, or a floor drain that fills while the washer drains, means the clog is in a line those fixtures share. At that point, stop using every fixture connected to that line. Often that means cutting back on water use throughout the home. In a two-family house, the other unit may need to hold off too.
When the Water Looks or Smells Bad
Dark, dirty, or foul-smelling water may contain sewage. Stop using water in the whole home. Keep children and pets away, and wear gloves if you need to move anything nearby.
When Your Own Efforts Are Not Working
It is fine to try a plunger a few times. If the clog does not budge, stop. Forcing it can splash dirty water and damage seals. Mixing different drain products is risky, since some combinations release harmful fumes.
Keep a bucket and towels nearby while you wait. If the drain is under a sink, clear out the cabinet below so it is easy to reach.
A plumber can get the drain flowing again and find out why it clogged. For help, call JPR Plumbing at (833) 603-1840. To prevent the next clog, ask about care for the rest of your drains.