If your water heater stops working, check for safety problems first, like a gas smell or a leak. Then look at the simple causes, such as a tripped breaker, an unlit pilot, or an error code. If those checks do not help, call a plumber to diagnose the problem.

Safety Checks First

If you smell gas, do not touch the heater. Leave the home and call 911 or your gas utility from outside. If water is leaking from the tank, close the cold-water valve and turn off the power or gas to the heater. Keep away from hot water on the floor.

Simple Things to Check

For an electric heater, check whether its breaker has tripped. You can reset it once. If it trips again, leave it off. For a gas heater, look through the viewing window to see if the pilot is lit, if your model has one. Some heaters have relighting steps on the label. Follow them only if you are comfortable, and never if you smell gas.

For a tankless heater, look for an error code on the display. Write it down, since it can help a plumber find the cause.

Common Reasons Heaters Stop

Pilot lights can go out because of a faulty thermocouple or a draft. Electric heating elements can burn out. Thermostats can fail. Venting problems can make gas heaters shut down for safety. Older tanks may simply be near the end of their life.

When to Call a Plumber

Call a plumber if the heater still will not work, if the pilot keeps going out, or if you notice leaks, rust, or strange sounds. A plumber can test the parts and tell you whether a repair or a new heater makes more sense. You can read more about how we fix water heaters that stop working.

If your water heater has stopped working, JPR Plumbing can help. Call (833) 603-1840. Yearly tank flushing during a scheduled maintenance call can help prevent the next breakdown.

Leave a Reply

Your email address will not be published. Required fields are marked *